Taking Care of your CPAP Equipment

Hello there Truckers…. thought I would post a little about CPAP unit and equipment upkeep….

Proper care and maintenance of your CPAP equipment is important and will ensure your equipment

delivers optimal treatment. For those of you using your CPAP equipment in your truck, you have

special considerations with regard to caring and maintaining your equipment:

1. Your CPAP unit should be kept in a dirt and dust free environment. You will need to store your

CPAP unit inside the carrying case it came in, or wrap it inside a towel/blanket after your treatment

session. This will ensure that your CPAP unit is also protected from cigarette smoke contamination.

2. Make sure your CPAP unit is secured while you are driving to protect it from bouncing and falls.

The following is a schedule of cleaning and maintenance recommendations:


1. If possible, disconnect your air tubing from your CPAP unit and hang it in a clean and dry place

until next use.

2. If using a humidifier with your treatment, make sure you empty the water chamber of any left

over water prior to driving. The CPAP unit is NOT waterproof and if there is water in the water

chamber- it is very likely that your CPAP unit will suffer water damage. It is preferable to use

distilled water in your humidifier chamber (to reduce the mineral ring build up inside your

chamber), but not necessary.


1. Wash the air tube (hose) in warm water using mild detergent (i.e. Ivory Liquid Soap) and rinse

thoroughly. Drip dry away from sunlight.

2. Wash your mask and cushion components including the harness in mild detergent. Wipe the

mask and cushions dry and air dry the harness.


Clean the exterior of the CPAP unit with a damp cloth and mild detergent.


Your CPAP unit ( if using ResMed) has a disposable air filter in the back, under the blue air filter cover.

If driving in dusty conditions, it is probably a good idea to change your air filter every other

month or sooner. The air filter is NOT washable or reusable.

To change the air filter:

Remove the air filter cover in the back of your CPAP unit and remove the old air filter. Insert a

new filter with the blue tinted side facing out from the device. Make sure to replace the air

filter cover.


The wear and tear on CPAP equipment is different for each individual, but most people need

to replace their equipment as follows:

Every 6 Months: Mask, Hose and Water chamber (It’s a good idea to have an extra hose and mask in your truck with you in the event something happens to these items while you are away from home).

Every 2 Months or sooner: Cushions for your mask and air filters. (Many people find that they need to change the cushion every month- or else they start to experience leaks and ill fitting mask issues)….

*(Cushions (like a toothbrush) need to be replaced often because they wear out from usage. It

may not be visually obvious to you, but a worn out cushion could affect your treatment by increasing

leaks around the mask).

If you can incorporate as many of these steps as possible, especially making

sure your air filter is clean and your humidifier chamber is dry when driving, you will greatly increase

the lifespan of your CPAP unit.

Happy Driving!

Katia LaManna, LCSW

Precision Pulmonary Diagnostics LLC